Diamond Polycarbonate Embossd Sheet Decorative PC Polycarbonate Embossed Sheets for outdoor Gate
How to clean and maintain an outdoor gate with polycarbonate embossed panels?
Cleaning and maintenance of polycarbonate embossed panels for outdoor doors requires gentle, meticulous principles to maintain their good appearance and performance. The following are specific cleaning and maintenance methods:
Cleaning method
Wipe regularly: Every once in a while (such as every week or every two weeks), wipe the surface of the door with a soft, damp cloth to remove dust and stains that accumulate daily. Avoid using rough cloth or brush to avoid scratching the surface of the board.
Clean stains: For general stains, you can use a mild detergent, such as neutral detergent, dilute it in water, dip in the solution with a soft cloth gently wipe the stain, then rinse with water, and then dry with a clean soft cloth. For stubborn stains, such as oil stains, paint stains, etc., you can use a special polycarbonate cleaner, but first carry out a small area test in an inconspicuous part to ensure that the cleaner will not cause damage to the board, and then carry out a comprehensive cleaning.
Rinse details: Pay attention to rinse all nooks and crannies of the door to avoid cleaning residue. Especially pay attention to the embossing part, these places are easy to hide dirt, need to be carefully cleaned, you can use a soft brush to gently brush the gap, but pay attention to the strength to prevent scratching.
Maintenance measures
Avoid sharp objects scratching: Although the polycarbonate board has a certain strength, it is still easy to be scratched by sharp objects. In daily use, sharp objects such as keys and tools should be avoided in contact with the surface of the door to prevent scratching.
Prevent chemical corrosion: Avoid the door contact with organic solvents, strong acids and bases and other chemical substances, such as gasoline, alcohol, sulfuric acid, etc., these substances may corrode the surface of the plate, affecting its performance and appearance. If accidentally touched, should immediately flush with plenty of water.
Inspection and maintenance: Check the fixed parts of the door regularly, such as screws, hinges, etc., to ensure that they are tight and not loose. At the same time, check whether the plate has cracks, deformation and other damage, if there are problems, it should be repaired or replaced in time.
Shielding protection: If conditions permit, a sunshade or canopy can be set above the door to reduce direct sunlight and rain erosion, and reduce the speed of aging and discoloration of the plate. In winter, try to avoid exposing the door to a low temperature environment for a long time, and appropriate insulation measures can be taken to prevent the plate from becoming brittle due to low temperature
